pub struct AccountFlags { /* private fields */ }
Expand description
Fieldset that facilitates compacting the parent type. Used bytes: 2 | Unused bits: 5
Implementations§
Source§impl AccountFlags
impl AccountFlags
Source§impl AccountFlags
impl AccountFlags
Sourcepub const fn into_bytes(self) -> [u8; 2]
pub const fn into_bytes(self) -> [u8; 2]
Sourcepub const fn from_bytes(bytes: [u8; 2]) -> Self
pub const fn from_bytes(bytes: [u8; 2]) -> Self
Converts the given bytes directly into the bitfield struct.
Source§impl AccountFlags
impl AccountFlags
Sourcepub fn nonce_len_or_err(
&self,
) -> Result<<B4 as Specifier>::InOut, InvalidBitPattern<<B4 as Specifier>::Bytes>>
pub fn nonce_len_or_err( &self, ) -> Result<<B4 as Specifier>::InOut, InvalidBitPattern<<B4 as Specifier>::Bytes>>
Returns the value of nonce_len.
#Errors
If the returned value contains an invalid bit pattern for nonce_len.
Sourcepub fn with_nonce_len(self, new_val: <B4 as Specifier>::InOut) -> Self
pub fn with_nonce_len(self, new_val: <B4 as Specifier>::InOut) -> Self
Returns a copy of the bitfield with the value of nonce_len set to the given value.
#Panics
If the given value is out of bounds for nonce_len.
Sourcepub fn with_nonce_len_checked(
self,
new_val: <B4 as Specifier>::InOut,
) -> Result<Self, OutOfBounds>
pub fn with_nonce_len_checked( self, new_val: <B4 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>
Returns a copy of the bitfield with the value of nonce_len set to the given value.
#Errors
If the given value is out of bounds for nonce_len.
Sourcepub fn set_nonce_len(&mut self, new_val: <B4 as Specifier>::InOut)
pub fn set_nonce_len(&mut self, new_val: <B4 as Specifier>::InOut)
Sets the value of nonce_len to the given value.
#Panics
If the given value is out of bounds for nonce_len.
Sourcepub fn set_nonce_len_checked(
&mut self,
new_val: <B4 as Specifier>::InOut,
) -> Result<(), OutOfBounds>
pub fn set_nonce_len_checked( &mut self, new_val: <B4 as Specifier>::InOut, ) -> Result<(), OutOfBounds>
Sets the value of nonce_len to the given value.
#Errors
If the given value is out of bounds for nonce_len.
Sourcepub fn balance_len(&self) -> <B6 as Specifier>::InOut
pub fn balance_len(&self) -> <B6 as Specifier>::InOut
Returns the value of balance_len.
Sourcepub fn balance_len_or_err(
&self,
) -> Result<<B6 as Specifier>::InOut, InvalidBitPattern<<B6 as Specifier>::Bytes>>
pub fn balance_len_or_err( &self, ) -> Result<<B6 as Specifier>::InOut, InvalidBitPattern<<B6 as Specifier>::Bytes>>
Returns the value of balance_len.
#Errors
If the returned value contains an invalid bit pattern for balance_len.
Sourcepub fn with_balance_len(self, new_val: <B6 as Specifier>::InOut) -> Self
pub fn with_balance_len(self, new_val: <B6 as Specifier>::InOut) -> Self
Returns a copy of the bitfield with the value of balance_len set to the given value.
#Panics
If the given value is out of bounds for balance_len.
Sourcepub fn with_balance_len_checked(
self,
new_val: <B6 as Specifier>::InOut,
) -> Result<Self, OutOfBounds>
pub fn with_balance_len_checked( self, new_val: <B6 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>
Returns a copy of the bitfield with the value of balance_len set to the given value.
#Errors
If the given value is out of bounds for balance_len.
Sourcepub fn set_balance_len(&mut self, new_val: <B6 as Specifier>::InOut)
pub fn set_balance_len(&mut self, new_val: <B6 as Specifier>::InOut)
Sets the value of balance_len to the given value.
#Panics
If the given value is out of bounds for balance_len.
Sourcepub fn set_balance_len_checked(
&mut self,
new_val: <B6 as Specifier>::InOut,
) -> Result<(), OutOfBounds>
pub fn set_balance_len_checked( &mut self, new_val: <B6 as Specifier>::InOut, ) -> Result<(), OutOfBounds>
Sets the value of balance_len to the given value.
#Errors
If the given value is out of bounds for balance_len.
Sourcepub fn bytecode_hash_len(&self) -> <B1 as Specifier>::InOut
pub fn bytecode_hash_len(&self) -> <B1 as Specifier>::InOut
Returns the value of bytecode_hash_len.
Sourcepub fn bytecode_hash_len_or_err(
&self,
) -> Result<<B1 as Specifier>::InOut, InvalidBitPattern<<B1 as Specifier>::Bytes>>
pub fn bytecode_hash_len_or_err( &self, ) -> Result<<B1 as Specifier>::InOut, InvalidBitPattern<<B1 as Specifier>::Bytes>>
Returns the value of bytecode_hash_len.
#Errors
If the returned value contains an invalid bit pattern for bytecode_hash_len.
Sourcepub fn with_bytecode_hash_len(self, new_val: <B1 as Specifier>::InOut) -> Self
pub fn with_bytecode_hash_len(self, new_val: <B1 as Specifier>::InOut) -> Self
Returns a copy of the bitfield with the value of bytecode_hash_len set to the given value.
#Panics
If the given value is out of bounds for bytecode_hash_len.
Sourcepub fn with_bytecode_hash_len_checked(
self,
new_val: <B1 as Specifier>::InOut,
) -> Result<Self, OutOfBounds>
pub fn with_bytecode_hash_len_checked( self, new_val: <B1 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>
Returns a copy of the bitfield with the value of bytecode_hash_len set to the given value.
#Errors
If the given value is out of bounds for bytecode_hash_len.
Sourcepub fn set_bytecode_hash_len(&mut self, new_val: <B1 as Specifier>::InOut)
pub fn set_bytecode_hash_len(&mut self, new_val: <B1 as Specifier>::InOut)
Sets the value of bytecode_hash_len to the given value.
#Panics
If the given value is out of bounds for bytecode_hash_len.
Sourcepub fn set_bytecode_hash_len_checked(
&mut self,
new_val: <B1 as Specifier>::InOut,
) -> Result<(), OutOfBounds>
pub fn set_bytecode_hash_len_checked( &mut self, new_val: <B1 as Specifier>::InOut, ) -> Result<(), OutOfBounds>
Sets the value of bytecode_hash_len to the given value.
#Errors
If the given value is out of bounds for bytecode_hash_len.
Trait Implementations§
Source§impl Clone for AccountFlags
impl Clone for AccountFlags
Source§fn clone(&self) -> AccountFlags
fn clone(&self) -> AccountFlags
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for AccountFlags
impl Debug for AccountFlags
Source§impl Default for AccountFlags
impl Default for AccountFlags
Source§fn default() -> AccountFlags
fn default() -> AccountFlags
impl Copy for AccountFlags
Auto Trait Implementations§
impl Freeze for AccountFlags
impl RefUnwindSafe for AccountFlags
impl Send for AccountFlags
impl Sync for AccountFlags
impl Unpin for AccountFlags
impl UnwindSafe for AccountFlags
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read more§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self
, then passes self.as_mut()
into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self
, then passes self.deref()
into the pipe function.§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref()
only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<T> WithSubscriber for T
impl<T> WithSubscriber for T
§fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where
S: Into<Dispatch>,
§fn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Layout§
Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...)
attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.
Size: 2 bytes