reth_primitives

Struct Block

Source
pub struct Block {
    pub header: Header,
    pub body: BlockBody,
}
Expand description

Ethereum full block.

Withdrawals can be optionally included at the end of the RLP encoded message.

Fields§

§header: Header

Block header.

§body: BlockBody

Block body.

Implementations§

Source§

impl Block

Source

pub fn seal_slow(self) -> SealedBlock

Calculate the header hash and seal the block so that it can’t be changed.

Source

pub fn seal(self, hash: B256) -> SealedBlock

Seal the block with a known hash.

WARNING: This method does not perform validation whether the hash is correct.

Source

pub fn senders(&self) -> Option<Vec<Address>>

Expensive operation that recovers transaction signer. See SealedBlockWithSenders.

Source

pub fn with_senders_unchecked(self, senders: Vec<Address>) -> BlockWithSenders

Transform into a BlockWithSenders.

§Panics

If the number of senders does not match the number of transactions in the block and the signer recovery for one of the transactions fails.

Note: this is expected to be called with blocks read from disk.

Source

pub fn try_with_senders_unchecked( self, senders: Vec<Address>, ) -> Result<BlockWithSenders, Self>

Transform into a BlockWithSenders using the given senders.

If the number of senders does not match the number of transactions in the block, this falls back to manually recovery, but without ensuring that the signature has a low s value. See also TransactionSigned::recover_signer_unchecked

Returns an error if a signature is invalid.

Source

pub fn with_recovered_senders(self) -> Option<BlockWithSenders>

Expensive. Transform into a BlockWithSenders by recovering senders in the contained transactions.

Returns None if a transaction is invalid.

Methods from Deref<Target = Header>§

pub fn hash_slow(&self) -> FixedBytes<32>

Heavy function that will calculate hash of data and will not save the change to metadata.

Use Header::seal_slow and unlock if you need the hash to be persistent.

pub fn is_empty(&self) -> bool

Checks if the header is empty - has no transactions and no ommers

pub fn ommers_hash_is_empty(&self) -> bool

Check if the ommers hash equals to empty hash list.

pub fn transaction_root_is_empty(&self) -> bool

Check if the transaction root equals to empty root.

pub fn blob_fee(&self) -> Option<u128>

Returns the blob fee for this block according to the EIP-4844 spec.

Returns None if excess_blob_gas is None

pub fn next_block_blob_fee(&self) -> Option<u128>

Returns the blob fee for the next block according to the EIP-4844 spec.

Returns None if excess_blob_gas is None.

See also Self::next_block_excess_blob_gas

pub fn next_block_base_fee(&self, base_fee_params: BaseFeeParams) -> Option<u64>

Calculate base fee for next block according to the EIP-1559 spec.

Returns a None if no base fee is set, no EIP-1559 support

pub fn next_block_excess_blob_gas(&self) -> Option<u64>

Calculate excess blob gas for the next block according to the EIP-4844 spec.

Returns a None if no excess blob gas is set, no EIP-4844 support

pub fn size(&self) -> usize

Calculate a heuristic for the in-memory size of the Header.

pub fn parent_num_hash(&self) -> NumHash

Returns the parent block’s number and hash

Note: for the genesis block the parent number is 0 and the parent hash is the zero hash.

pub fn num_hash_slow(&self) -> NumHash

Returns the block’s number and hash.

Note: this hashes the header.

pub fn is_zero_difficulty(&self) -> bool

Checks if the block’s difficulty is set to zero, indicating a Proof-of-Stake header.

This function is linked to EIP-3675, proposing the consensus upgrade to Proof-of-Stake: EIP-3675

Verifies whether, as per the EIP, the block’s difficulty is updated to zero, signifying the transition to a Proof-of-Stake mechanism.

Returns true if the block’s difficulty matches the constant zero set by the EIP.

pub fn exceeds_allowed_future_timestamp(&self, present_timestamp: u64) -> bool

Checks if the block’s timestamp is in the future based on the present timestamp.

Clock can drift but this can be consensus issue.

Note: This check is relevant only pre-merge.

Trait Implementations§

Source§

impl<'a> Arbitrary<'a> for Block

Available on crate feature arbitrary only.
Source§

fn arbitrary(u: &mut Unstructured<'a>) -> Result<Self>

Generate an arbitrary value of Self from the given unstructured data. Read more
§

fn arbitrary_take_rest(u: Unstructured<'a>) -> Result<Self, Error>

Generate an arbitrary value of Self from the entirety of the given unstructured data. Read more
§

fn size_hint(depth: usize) -> (usize, Option<usize>)

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself. Read more
§

fn try_size_hint( depth: usize, ) -> Result<(usize, Option<usize>), MaxRecursionReached>

Get a size hint for how many bytes out of an Unstructured this type needs to construct itself. Read more
Source§

impl Block for Block

Source§

type Header = Header

Header part of the block.
Source§

type Body = BlockBody

The block’s body contains the transactions in the block.
Source§

fn header(&self) -> &Self::Header

Returns reference to block header.
Source§

fn body(&self) -> &Self::Body

Returns reference to block body.
Source§

impl Clone for Block

Source§

fn clone(&self) -> Block

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for Block

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Decodable for Block

Source§

fn decode(b: &mut &[u8]) -> Result<Self>

Decodes the blob into the appropriate type. buf must be advanced past the decoded object.
Source§

impl Default for Block

Source§

fn default() -> Block

Returns the “default value” for a type. Read more
Source§

impl Deref for Block

Source§

type Target = Header

The resulting type after dereferencing.
Source§

fn deref(&self) -> &Self::Target

Dereferences the value.
Source§

impl<'de> Deserialize<'de> for Block

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Encodable for Block

Source§

fn encode(&self, out: &mut dyn BufMut)

Encodes the type into the out buffer.
Source§

fn length(&self) -> usize

Returns the length of the encoding of this type in bytes. Read more
Source§

impl From<Block> for BlockBody

Source§

fn from(block: Block) -> Self

Converts to this type from the input type.
Source§

impl From<SealedBlock> for Block

Source§

fn from(block: SealedBlock) -> Self

Converts to this type from the input type.
Source§

impl InMemorySize for Block

Source§

fn size(&self) -> usize

Calculates a heuristic for the in-memory size of the Block.

Source§

impl PartialEq for Block

Source§

fn eq(&self, other: &Block) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl Serialize for Block

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
Source§

impl TryFrom<WithOtherFields<Block<WithOtherFields<Transaction<AnyTxEnvelope>>, Header<AnyHeader>>>> for Block

Available on crate feature alloy-compat only.
Source§

type Error = ConversionError

The type returned in the event of a conversion error.
Source§

fn try_from(block: AnyRpcBlock) -> Result<Self, Self::Error>

Performs the conversion.
Source§

impl Eq for Block

Source§

impl StructuralPartialEq for Block

Auto Trait Implementations§

§

impl !Freeze for Block

§

impl RefUnwindSafe for Block

§

impl Send for Block

§

impl Sync for Block

§

impl Unpin for Block

§

impl UnwindSafe for Block

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit #126799)
Performs copy-assignment from self to dst. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
Source§

impl<T> DynClone for T
where T: Clone,

Source§

fn __clone_box(&self, _: Private) -> *mut ()

§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<P, T> Receiver for P
where P: Deref<Target = T> + ?Sized, T: ?Sized,

Source§

type Target = T

🔬This is a nightly-only experimental API. (arbitrary_self_types #44874)
Available on non-bootstrap only.
The target type on which the method may be called.
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<A> ArbInterop for A
where A: for<'a> Arbitrary<'a> + 'static + Debug + Clone,

Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

Source§

impl<T> FullBlock for T
where T: Block + Encodable + Decodable, <T as Block>::Header: FullBlockHeader, <T as Block>::Body: FullBlockBody,

Source§

impl<T> MaybeArbitrary for T
where T: for<'a> Arbitrary<'a>,

Source§

impl<T> MaybeSerde for T
where T: Serialize + for<'de> Deserialize<'de>,

§

impl<T> RpcObject for T
where T: RpcParam + RpcReturn,

§

impl<T> RpcParam for T
where T: Serialize + Clone + Debug + Send + Sync + Unpin,

§

impl<T> RpcReturn for T
where T: DeserializeOwned + Debug + Send + Sync + Unpin + 'static,

Layout§

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 792 bytes