Trait BlockExecutor 

pub trait BlockExecutor: Sized {
    type Transaction;
    type Receipt;
    type Evm: Evm;
    type TransactionResultWithState: BlockTransactionResult<<Self::Evm as Evm>::EvmTypes> + Send;
    type BlockAccessList: Send + Sync;

    // Required methods
    fn evm(&self) -> &Self::Evm;
    fn evm_mut(&mut self) -> &mut Self::Evm;
    fn convert_block_access_list(
        block_access_list: &Vec<AccountChanges>,
    ) -> Result<Self::BlockAccessList, BlockExecutionError>;
    fn set_block_access_list(
        &mut self,
        block_access_list: Arc<Self::BlockAccessList>,
    );
    fn set_block_access_index(&mut self, index: BlockAccessIndex);
    fn enable_block_access_list_builder(&mut self);
    fn take_block_access_list(&mut self) -> Option<Vec<AccountChanges>>;
    fn apply_pre_execution_changes(&mut self) -> Result<(), BlockExecutionError>;
    fn into_state(self) -> BundleState;
    fn validate_transaction_gas_limit(
        &mut self,
        gas_limit: u64,
    ) -> Result<(), BlockExecutionError>;
    fn execute_transaction_without_commit(
        &mut self,
        transaction: impl ExecutorTx<Self>,
    ) -> Result<Self::TransactionResultWithState, BlockExecutionError>;
    fn commit_transaction(
        &mut self,
        output: Self::TransactionResultWithState,
    ) -> Result<GasOutput, BlockExecutionError>;
    fn receipts(&self) -> &[Self::Receipt];
    fn finish_with_block_access_list(
        self,
    ) -> Result<(BlockExecutionOutput<Self::Receipt>, Option<Vec<AccountChanges>>), BlockExecutionError>;

    // Provided methods
    fn set_state_hook(
        &mut self,
        _hook: impl FnMut(StateUpdate) + Send + 'static,
    ) -> bool { ... }
    fn execute_transaction_with_commit_condition(
        &mut self,
        transaction: impl ExecutorTx<Self>,
        f: impl FnOnce(&TxResultExt<<<Self::Evm as Evm>::EvmTypes as EvmTypesHost>::TxResultExt>, TxStateChanges<'_>) -> CommitChanges,
    ) -> Result<Option<GasOutput>, BlockExecutionError> { ... }
    fn inspect_transaction_without_commit<I>(
        &mut self,
        transaction: impl ExecutorTx<Self>,
        inspector: I,
    ) -> Result<(I, Self::TransactionResultWithState), BlockExecutionError>
       where I: Inspector<<Self::Evm as Evm>::EvmTypes> + 'static { ... }
    fn execute_transaction_with_result_closure(
        &mut self,
        transaction: impl ExecutorTx<Self>,
        f: impl FnOnce(&TxResultExt<<<Self::Evm as Evm>::EvmTypes as EvmTypesHost>::TxResultExt>),
    ) -> Result<GasOutput, BlockExecutionError> { ... }
    fn execute_transaction(
        &mut self,
        transaction: impl ExecutorTx<Self>,
    ) -> Result<GasOutput, BlockExecutionError> { ... }
    fn finish_with_prepared_block_access_list(
        self,
    ) -> Result<(BlockExecutionOutput<Self::Receipt>, Option<Bal>), BlockExecutionError> { ... }
    fn finish(
        self,
    ) -> Result<BlockExecutionOutput<Self::Receipt>, BlockExecutionError> { ... }
}

Available on crate feature evm only.

A configured block executor.

Required Associated Types

type Transaction

Consensus transaction type executed by this executor.

type Receipt

Receipt type produced by this executor.

type Evm: Evm

EVM instance used by this executor.

type TransactionResultWithState: BlockTransactionResult<<Self::Evm as Evm>::EvmTypes> + Send

Owned transaction execution result and detached state changes.

type BlockAccessList: Send + Sync

EVM-native block access list used for indexed reads.

Required Methods

fn evm(&self) -> &Self::Evm

Returns the underlying EVM.

fn evm_mut(&mut self) -> &mut Self::Evm

Returns the underlying EVM mutably.

fn convert_block_access_list( block_access_list: &Vec<AccountChanges>, ) -> Result<Self::BlockAccessList, BlockExecutionError>

Converts a canonical EIP-7928 block access list into the EVM-native representation.

fn set_block_access_list( &mut self, block_access_list: Arc<Self::BlockAccessList>, )

Attaches an EIP-7928 block access list for indexed state reads.

fn set_block_access_index(&mut self, index: BlockAccessIndex)

Sets the EIP-7928 block access index used by state reads and BAL construction.

fn enable_block_access_list_builder(&mut self)

Enables construction of an EIP-7928 block access list from committed state changes.

fn take_block_access_list(&mut self) -> Option<Vec<AccountChanges>>

Takes the canonical EIP-7928 block access list built from committed state changes.

fn apply_pre_execution_changes(&mut self) -> Result<(), BlockExecutionError>

Applies pre-execution block changes.

fn into_state(self) -> BundleState

Consumes the executor and returns the state accumulated so far without applying post-execution block changes.

fn validate_transaction_gas_limit( &mut self, gas_limit: u64, ) -> Result<(), BlockExecutionError>

Validates transaction gas admission against the executor’s current block or segment budget. Speculative workers and ordered commits must perform the same check before accepting a transaction’s result or execution error.

fn execute_transaction_without_commit( &mut self, transaction: impl ExecutorTx<Self>, ) -> Result<Self::TransactionResultWithState, BlockExecutionError>

Executes a transaction and detaches its state changes without committing them.

fn commit_transaction( &mut self, output: Self::TransactionResultWithState, ) -> Result<GasOutput, BlockExecutionError>

Commits detached transaction state and records its receipt and gas accounting.

fn receipts(&self) -> &[Self::Receipt]

Returns receipts accumulated so far.

fn finish_with_block_access_list( self, ) -> Result<(BlockExecutionOutput<Self::Receipt>, Option<Vec<AccountChanges>>), BlockExecutionError>

Finishes block execution and returns the output.

Provided Methods

fn set_state_hook( &mut self, _hook: impl FnMut(StateUpdate) + Send + 'static, ) -> bool

Sets a hook for state updates emitted during block execution, including pre-execution block changes and transaction changes.

Returns true if the hook was installed.

fn execute_transaction_with_commit_condition( &mut self, transaction: impl ExecutorTx<Self>, f: impl FnOnce(&TxResultExt<<<Self::Evm as Evm>::EvmTypes as EvmTypesHost>::TxResultExt>, TxStateChanges<'_>) -> CommitChanges, ) -> Result<Option<GasOutput>, BlockExecutionError>

Executes a transaction, invokes f with the borrowed execution result and state changes, and commits changes when f returns CommitChanges::Yes.

The state changes are borrowed before the transaction is committed or discarded, so f can read what the transaction wrote (balances, storage slots) to decide whether to keep it.

fn inspect_transaction_without_commit<I>( &mut self, transaction: impl ExecutorTx<Self>, inspector: I, ) -> Result<(I, Self::TransactionResultWithState), BlockExecutionError>

where I: Inspector<<Self::Evm as Evm>::EvmTypes> + 'static,

Executes a transaction with inspector and detaches its state changes without committing them.

Returns the inspector together with the output, so a tracer observes the transaction exactly as the executor runs it, including any changes the executor applies on top of the EVM result. Replaces any inspector already set on the executor’s EVM. Returns an error if the executor removed or replaced the inspector while executing the transaction.

fn execute_transaction_with_result_closure( &mut self, transaction: impl ExecutorTx<Self>, f: impl FnOnce(&TxResultExt<<<Self::Evm as Evm>::EvmTypes as EvmTypesHost>::TxResultExt>), ) -> Result<GasOutput, BlockExecutionError>

Executes a transaction, invokes f with the borrowed execution result, and commits changes.

fn execute_transaction( &mut self, transaction: impl ExecutorTx<Self>, ) -> Result<GasOutput, BlockExecutionError>

Executes a transaction and commits changes.

fn finish_with_prepared_block_access_list( self, ) -> Result<(BlockExecutionOutput<Self::Receipt>, Option<Bal>), BlockExecutionError>

Finishes execution while retaining the prepared evm2 BAL for downstream consumers.

Executors that build a native BAL can override this to avoid converting it back from the canonical representation.

fn finish( self, ) -> Result<BlockExecutionOutput<Self::Receipt>, BlockExecutionError>

Finishes block execution and returns the output.

Dyn Compatibility

This trait is not dyn compatible.

In older versions of Rust, dyn compatibility was called "object safety".

Implementors

impl<'a, C, F> BlockExecutor for EthBigBlockExecutor<'a, C, F>

where C: EthereumHardforks, F: EvmFactory, <F as EvmFactory>::Types: EvmTypes<Tx = TxEnvelope>, <<F as EvmFactory>::Types as EvmTypesHost>::Tx: Typed2718, <<F as EvmFactory>::Types as EvmTypesHost>::TxResultExt: Send + Sync,

type Transaction = EthereumTxEnvelope<TxEip4844>

type Receipt = EthereumReceipt

type Evm = Evm<'a, <F as EvmFactory>::Types>

type TransactionResultWithState = EthTransactionResultWithState<<F as EvmFactory>::Types>

type BlockAccessList = Bal

impl<'a, T, R> BlockExecutor for EthBlockExecutor<'a, T, R>

where T: EvmTypes, <T as EvmTypesHost>::Tx: for<'a> Typed2718, <T as EvmTypesHost>::TxResultExt: for<'a> Send + for<'a> Sync, R: ReceiptBuilder,

type Transaction = <R as ReceiptBuilder>::Transaction

type Receipt = <R as ReceiptBuilder>::Receipt

type Evm = Evm<'a, T>

type TransactionResultWithState = EthTransactionResultWithState<T, <<R as ReceiptBuilder>::Transaction as TransactionEnvelope>::TxType>

type BlockAccessList = Bal