P2PStreamError

reth_eth_wire::errors

Enum P2PStreamError

pub enum P2PStreamError {
Show 15 variants
    Io(Error),
    Rlp(Error),
    Snap(Error),
    HandshakeError(P2PHandshakeError),
    MessageTooBig {
        message_size: usize,
        max_size: usize,
    },
    UnknownReservedMessageId(u8),
    EmptyProtocolMessage,
    PingerError(PingerError),
    PingTimeout,
    ParseSharedCapability(SharedCapabilityError),
    CapabilityNotShared,
    MismatchedProtocolVersion(GotExpected<ProtocolVersion>),
    SendBufferFull,
    Disconnected(DisconnectReason),
    UnknownDisconnectReason(UnknownDisconnectReason),
}

Expand description

Errors when sending/receiving p2p messages. These should result in kicking the peer.

Variants§

Io(Error)

I/O error.

Rlp(Error)

RLP encoding/decoding error.

Snap(Error)

Error in compression/decompression using Snappy.

HandshakeError(P2PHandshakeError)

Error during the P2P handshake.

MessageTooBig

Message size exceeds maximum length error.

Fields

§message_size: usize

The actual size of the message received.

§max_size: usize

The maximum allowed size for the message.

UnknownReservedMessageId(u8)

Unknown reserved P2P message ID error.

EmptyProtocolMessage

Empty protocol message received error.

PingerError(PingerError)

Error related to the Pinger.

PingTimeout

Ping timeout error.

ParseSharedCapability(SharedCapabilityError)

Error parsing shared capabilities.

CapabilityNotShared

Capability not supported on the stream to this peer.

MismatchedProtocolVersion(GotExpected<ProtocolVersion>)

Mismatched protocol version error.

SendBufferFull

Too many messages buffered before sending.

Disconnected(DisconnectReason)

Disconnected error.

UnknownDisconnectReason(UnknownDisconnectReason)

Unknown disconnect reason error.

Implementations§

impl P2PStreamError

pub const fn as_disconnected(&self) -> Option<DisconnectReason>

Returns the DisconnectReason if it is the Disconnected variant.

Trait Implementations§

impl Debug for P2PStreamError

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Display for P2PStreamError

fn fmt(&self, __formatter: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Error for P2PStreamError

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more

1.0.0 · Source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()

1.0.0 · Source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access #99301)

Provides type-based access to context intended for error reports. Read more

impl From<Error> for P2PStreamError

fn from(source: Error) -> Self

Converts to this type from the input type.

impl From<Error> for P2PStreamError

fn from(source: Error) -> Self

Converts to this type from the input type.

impl From<Error> for P2PStreamError

fn from(source: Error) -> Self

Converts to this type from the input type.

impl From<P2PHandshakeError> for P2PStreamError

fn from(source: P2PHandshakeError) -> Self

Converts to this type from the input type.

impl From<P2PStreamError> for EthStreamError

fn from(source: P2PStreamError) -> Self

Converts to this type from the input type.

impl From<PingerError> for P2PStreamError

fn from(source: PingerError) -> Self

Converts to this type from the input type.

impl From<SharedCapabilityError> for P2PStreamError

fn from(source: SharedCapabilityError) -> Self

Converts to this type from the input type.

impl From<UnknownDisconnectReason> for P2PStreamError

fn from(source: UnknownDisconnectReason) -> Self

Converts to this type from the input type.

Auto Trait Implementations§

impl Freeze for P2PStreamError

impl !RefUnwindSafe for P2PStreamError

impl Send for P2PStreamError

impl Sync for P2PStreamError

impl Unpin for P2PStreamError

impl !UnwindSafe for P2PStreamError

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<TxEnv, T> FromRecoveredTx<&T> for TxEnv
where TxEnv: FromRecoveredTx<T>,

fn from_recovered_tx(tx: &&T, sender: Address) -> TxEnv

Builds a [TxEnv] from a transaction and a sender address.

impl<TxEnv, T> FromTxWithEncoded<&T> for TxEnv
where TxEnv: FromTxWithEncoded<T>,

fn from_encoded_tx(tx: &&T, sender: Address, encoded: Bytes) -> TxEnv

Builds a [TxEnv] from a transaction, its sender, and encoded transaction bytes.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> Pipe for T
where T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Pointable for T

const ALIGN: usize

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> ToString for T
where T: Display + ?Sized,

fn to_string(&self) -> String

Converts the given value to a String. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more

Layout§

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 32 bytes

Size for each variant:

Io: 16 bytes
Rlp: 32 bytes
Snap: 32 bytes
HandshakeError: 32 bytes
MessageTooBig: 24 bytes
UnknownReservedMessageId: 2 bytes
EmptyProtocolMessage: 0 bytes
PingerError: 0 bytes
PingTimeout: 0 bytes
ParseSharedCapability: 32 bytes
CapabilityNotShared: 0 bytes
MismatchedProtocolVersion: 3 bytes
SendBufferFull: 0 bytes
Disconnected: 2 bytes
UnknownDisconnectReason: 2 bytes