Struct TxEip1559Flags Copy item path

impl TxEip1559Flags

pub const fn new() -> Self

Returns an instance with zero initialized data.

impl TxEip1559Flags

pub const fn into_bytes(self) -> [u8; 4]

Returns the underlying bits.

§Layout

The returned byte array is layed out in the same way as described here.

pub const fn from_bytes(bytes: [u8; 4]) -> Self

Converts the given bytes directly into the bitfield struct.

impl TxEip1559Flags

pub fn chain_id_len(&self) -> <B4 as Specifier>::InOut

Returns the value of chain_id_len.

pub fn chain_id_len_or_err( &self, ) -> Result<<B4 as Specifier>::InOut, InvalidBitPattern<<B4 as Specifier>::Bytes>>

Returns the value of chain_id_len.

#Errors

If the returned value contains an invalid bit pattern for chain_id_len.

pub fn with_chain_id_len(self, new_val: <B4 as Specifier>::InOut) -> Self

Returns a copy of the bitfield with the value of chain_id_len set to the given value.

#Panics

If the given value is out of bounds for chain_id_len.

pub fn with_chain_id_len_checked( self, new_val: <B4 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>

Returns a copy of the bitfield with the value of chain_id_len set to the given value.

#Errors

If the given value is out of bounds for chain_id_len.

pub fn set_chain_id_len(&mut self, new_val: <B4 as Specifier>::InOut)

Sets the value of chain_id_len to the given value.

#Panics

If the given value is out of bounds for chain_id_len.

pub fn set_chain_id_len_checked( &mut self, new_val: <B4 as Specifier>::InOut, ) -> Result<(), OutOfBounds>

Sets the value of chain_id_len to the given value.

#Errors

If the given value is out of bounds for chain_id_len.

pub fn nonce_len(&self) -> <B4 as Specifier>::InOut

Returns the value of nonce_len.

pub fn nonce_len_or_err( &self, ) -> Result<<B4 as Specifier>::InOut, InvalidBitPattern<<B4 as Specifier>::Bytes>>

Returns the value of nonce_len.

#Errors

If the returned value contains an invalid bit pattern for nonce_len.

pub fn with_nonce_len(self, new_val: <B4 as Specifier>::InOut) -> Self

Returns a copy of the bitfield with the value of nonce_len set to the given value.

#Panics

If the given value is out of bounds for nonce_len.

pub fn with_nonce_len_checked( self, new_val: <B4 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>

Returns a copy of the bitfield with the value of nonce_len set to the given value.

#Errors

If the given value is out of bounds for nonce_len.

pub fn set_nonce_len(&mut self, new_val: <B4 as Specifier>::InOut)

Sets the value of nonce_len to the given value.

#Panics

If the given value is out of bounds for nonce_len.

pub fn set_nonce_len_checked( &mut self, new_val: <B4 as Specifier>::InOut, ) -> Result<(), OutOfBounds>

Sets the value of nonce_len to the given value.

#Errors

If the given value is out of bounds for nonce_len.

pub fn gas_limit_len(&self) -> <B4 as Specifier>::InOut

Returns the value of gas_limit_len.

pub fn gas_limit_len_or_err( &self, ) -> Result<<B4 as Specifier>::InOut, InvalidBitPattern<<B4 as Specifier>::Bytes>>

Returns the value of gas_limit_len.

#Errors

If the returned value contains an invalid bit pattern for gas_limit_len.

pub fn with_gas_limit_len(self, new_val: <B4 as Specifier>::InOut) -> Self

Returns a copy of the bitfield with the value of gas_limit_len set to the given value.

#Panics

If the given value is out of bounds for gas_limit_len.

pub fn with_gas_limit_len_checked( self, new_val: <B4 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>

Returns a copy of the bitfield with the value of gas_limit_len set to the given value.

#Errors

If the given value is out of bounds for gas_limit_len.

pub fn set_gas_limit_len(&mut self, new_val: <B4 as Specifier>::InOut)

Sets the value of gas_limit_len to the given value.

#Panics

If the given value is out of bounds for gas_limit_len.

pub fn set_gas_limit_len_checked( &mut self, new_val: <B4 as Specifier>::InOut, ) -> Result<(), OutOfBounds>

Sets the value of gas_limit_len to the given value.

#Errors

If the given value is out of bounds for gas_limit_len.

pub fn max_fee_per_gas_len(&self) -> <B5 as Specifier>::InOut

Returns the value of max_fee_per_gas_len.

pub fn max_fee_per_gas_len_or_err( &self, ) -> Result<<B5 as Specifier>::InOut, InvalidBitPattern<<B5 as Specifier>::Bytes>>

Returns the value of max_fee_per_gas_len.

#Errors

If the returned value contains an invalid bit pattern for max_fee_per_gas_len.

pub fn with_max_fee_per_gas_len(self, new_val: <B5 as Specifier>::InOut) -> Self

Returns a copy of the bitfield with the value of max_fee_per_gas_len set to the given value.

#Panics

If the given value is out of bounds for max_fee_per_gas_len.

pub fn with_max_fee_per_gas_len_checked( self, new_val: <B5 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>

Returns a copy of the bitfield with the value of max_fee_per_gas_len set to the given value.

#Errors

If the given value is out of bounds for max_fee_per_gas_len.

pub fn set_max_fee_per_gas_len(&mut self, new_val: <B5 as Specifier>::InOut)

Sets the value of max_fee_per_gas_len to the given value.

#Panics

If the given value is out of bounds for max_fee_per_gas_len.

pub fn set_max_fee_per_gas_len_checked( &mut self, new_val: <B5 as Specifier>::InOut, ) -> Result<(), OutOfBounds>

Sets the value of max_fee_per_gas_len to the given value.

#Errors

If the given value is out of bounds for max_fee_per_gas_len.

pub fn max_priority_fee_per_gas_len(&self) -> <B5 as Specifier>::InOut

Returns the value of max_priority_fee_per_gas_len.

pub fn max_priority_fee_per_gas_len_or_err( &self, ) -> Result<<B5 as Specifier>::InOut, InvalidBitPattern<<B5 as Specifier>::Bytes>>

Returns the value of max_priority_fee_per_gas_len.

#Errors

If the returned value contains an invalid bit pattern for max_priority_fee_per_gas_len.

pub fn with_max_priority_fee_per_gas_len( self, new_val: <B5 as Specifier>::InOut, ) -> Self

Returns a copy of the bitfield with the value of max_priority_fee_per_gas_len set to the given value.

#Panics

If the given value is out of bounds for max_priority_fee_per_gas_len.

pub fn with_max_priority_fee_per_gas_len_checked( self, new_val: <B5 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>

Returns a copy of the bitfield with the value of max_priority_fee_per_gas_len set to the given value.

#Errors

If the given value is out of bounds for max_priority_fee_per_gas_len.

pub fn set_max_priority_fee_per_gas_len( &mut self, new_val: <B5 as Specifier>::InOut, )

Sets the value of max_priority_fee_per_gas_len to the given value.

#Panics

If the given value is out of bounds for max_priority_fee_per_gas_len.

pub fn set_max_priority_fee_per_gas_len_checked( &mut self, new_val: <B5 as Specifier>::InOut, ) -> Result<(), OutOfBounds>

Sets the value of max_priority_fee_per_gas_len to the given value.

#Errors

If the given value is out of bounds for max_priority_fee_per_gas_len.

pub fn to_len(&self) -> <B1 as Specifier>::InOut

Returns the value of to_len.

pub fn to_len_or_err( &self, ) -> Result<<B1 as Specifier>::InOut, InvalidBitPattern<<B1 as Specifier>::Bytes>>

Returns the value of to_len.

#Errors

If the returned value contains an invalid bit pattern for to_len.

pub fn with_to_len(self, new_val: <B1 as Specifier>::InOut) -> Self

Returns a copy of the bitfield with the value of to_len set to the given value.

#Panics

If the given value is out of bounds for to_len.

pub fn with_to_len_checked( self, new_val: <B1 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>

Returns a copy of the bitfield with the value of to_len set to the given value.

#Errors

If the given value is out of bounds for to_len.

pub fn set_to_len(&mut self, new_val: <B1 as Specifier>::InOut)

Sets the value of to_len to the given value.

#Panics

If the given value is out of bounds for to_len.

pub fn set_to_len_checked( &mut self, new_val: <B1 as Specifier>::InOut, ) -> Result<(), OutOfBounds>

Sets the value of to_len to the given value.

#Errors

If the given value is out of bounds for to_len.

pub fn value_len(&self) -> <B6 as Specifier>::InOut

Returns the value of value_len.

pub fn value_len_or_err( &self, ) -> Result<<B6 as Specifier>::InOut, InvalidBitPattern<<B6 as Specifier>::Bytes>>

Returns the value of value_len.

#Errors

If the returned value contains an invalid bit pattern for value_len.

pub fn with_value_len(self, new_val: <B6 as Specifier>::InOut) -> Self

Returns a copy of the bitfield with the value of value_len set to the given value.

#Panics

If the given value is out of bounds for value_len.

pub fn with_value_len_checked( self, new_val: <B6 as Specifier>::InOut, ) -> Result<Self, OutOfBounds>

Returns a copy of the bitfield with the value of value_len set to the given value.

#Errors

If the given value is out of bounds for value_len.

pub fn set_value_len(&mut self, new_val: <B6 as Specifier>::InOut)

Sets the value of value_len to the given value.

#Panics

If the given value is out of bounds for value_len.

pub fn set_value_len_checked( &mut self, new_val: <B6 as Specifier>::InOut, ) -> Result<(), OutOfBounds>

Sets the value of value_len to the given value.

#Errors

If the given value is out of bounds for value_len.

impl TxEip1559Flags

pub fn from(buf: &[u8]) -> (Self, &[u8])

Deserializes this fieldset and returns it, alongside the original slice in an advanced position.

Trait Implementations§

fn clone(&self) -> TxEip1559Flags

Returns a copy of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for TxEip1559Flags

fn fmt(&self, __bf_f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for TxEip1559Flags

fn default() -> TxEip1559Flags

Returns the “default value” for a type. Read more

Auto Trait Implementations§

impl Freeze for TxEip1559Flags

impl RefUnwindSafe for TxEip1559Flags

impl UnwindSafe for TxEip1559Flags

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit #126799)

Performs copy-assignment from self to dst. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more