Struct Signature
pub struct Signature { /* private fields */ }
Expand description
An Ethereum ECDSA signature.
Implementations§
§impl Signature
impl Signature
pub fn decode_rlp_vrs(buf: &mut &[u8]) -> Result<Signature, Error>
Available on crate feature rlp
only.
pub fn decode_rlp_vrs(buf: &mut &[u8]) -> Result<Signature, Error>
rlp
only.Decode an RLP-encoded VRS signature.
§impl Signature
impl Signature
pub const fn new(r: Uint<256, 4>, s: Uint<256, 4>, v: Parity) -> Signature
pub const fn new(r: Uint<256, 4>, s: Uint<256, 4>, v: Parity) -> Signature
Instantiate a new signature from r
, s
, and v
values.
pub fn into_inner(self) -> Signature<Secp256k1>
👎Deprecated: use Signature::to_k256
insteadAvailable on crate feature k256
only.
pub fn into_inner(self) -> Signature<Secp256k1>
Signature::to_k256
insteadk256
only.Returns the inner ECDSA signature.
pub fn to_k256(self) -> Result<Signature<Secp256k1>, Error>
Available on crate feature k256
only.
pub fn to_k256(self) -> Result<Signature<Secp256k1>, Error>
k256
only.Returns the inner ECDSA signature.
pub fn from_signature_and_parity<T, E>(
sig: Signature<Secp256k1>,
parity: T,
) -> Result<Signature, SignatureError>
Available on crate feature k256
only.
pub fn from_signature_and_parity<T, E>( sig: Signature<Secp256k1>, parity: T, ) -> Result<Signature, SignatureError>
k256
only.Instantiate from a signature and recovery id
pub fn from_scalars_and_parity<T, E>(
r: FixedBytes<32>,
s: FixedBytes<32>,
parity: T,
) -> Result<Signature, SignatureError>
pub fn from_scalars_and_parity<T, E>( r: FixedBytes<32>, s: FixedBytes<32>, parity: T, ) -> Result<Signature, SignatureError>
Creates a Signature
from the serialized r
and s
scalar values, which comprise the
ECDSA signature, alongside a v
value, used to determine the recovery ID.
pub fn normalize_s(&self) -> Option<Signature>
pub fn normalize_s(&self) -> Option<Signature>
Normalizes the signature into “low S” form as described in BIP 0062: Dealing with Malleability.
pub const fn recid(&self) -> RecoveryId
Available on crate feature k256
only.
pub const fn recid(&self) -> RecoveryId
k256
only.Returns the recovery ID.
pub fn recover_address_from_msg<T>(
&self,
msg: T,
) -> Result<Address, SignatureError>
Available on crate feature k256
only.
pub fn recover_address_from_msg<T>( &self, msg: T, ) -> Result<Address, SignatureError>
k256
only.pub fn recover_address_from_prehash(
&self,
prehash: &FixedBytes<32>,
) -> Result<Address, SignatureError>
Available on crate feature k256
only.
pub fn recover_address_from_prehash( &self, prehash: &FixedBytes<32>, ) -> Result<Address, SignatureError>
k256
only.Recovers an Address
from this signature and the given prehashed message.
pub fn recover_from_msg<T>(
&self,
msg: T,
) -> Result<VerifyingKey<Secp256k1>, SignatureError>
Available on crate feature k256
only.
pub fn recover_from_msg<T>( &self, msg: T, ) -> Result<VerifyingKey<Secp256k1>, SignatureError>
k256
only.Recovers a VerifyingKey
from this signature and the given message by first prefixing and
hashing the message according to EIP-191.
pub fn recover_from_prehash(
&self,
prehash: &FixedBytes<32>,
) -> Result<VerifyingKey<Secp256k1>, SignatureError>
Available on crate feature k256
only.
pub fn recover_from_prehash( &self, prehash: &FixedBytes<32>, ) -> Result<VerifyingKey<Secp256k1>, SignatureError>
k256
only.Recovers a VerifyingKey
from this signature and the given prehashed message.
pub fn from_bytes_and_parity<T, E>(
bytes: &[u8],
parity: T,
) -> Result<Signature, SignatureError>
pub fn from_bytes_and_parity<T, E>( bytes: &[u8], parity: T, ) -> Result<Signature, SignatureError>
Parses a signature from a byte slice, with a v value
§Panics
If the slice is not at least 64 bytes long.
pub fn from_rs_and_parity<T, E>(
r: Uint<256, 4>,
s: Uint<256, 4>,
parity: T,
) -> Result<Signature, SignatureError>
pub fn from_rs_and_parity<T, E>( r: Uint<256, 4>, s: Uint<256, 4>, parity: T, ) -> Result<Signature, SignatureError>
Instantiate from v, r, s.
pub fn with_chain_id(self, chain_id: u64) -> Signature
pub fn with_chain_id(self, chain_id: u64) -> Signature
Modifies the recovery ID by applying EIP-155 to a v
value.
pub fn with_parity_bool(self) -> Signature
pub fn with_parity_bool(self) -> Signature
Modifies the recovery ID by dropping any [EIP-155] v value, converting to a simple parity bool.
pub const fn chain_id(&self) -> Option<u64>
pub const fn chain_id(&self) -> Option<u64>
Returns the chain ID associated with the V value, if this signature is replay-protected by EIP-155.
pub const fn has_eip155_value(&self) -> bool
pub const fn has_eip155_value(&self) -> bool
Returns true if the signature is replay-protected by EIP-155.
This is true if the V value is 35 or greater. Values less than 35 are either not replay protected (27/28), or are invalid.
pub fn as_bytes(&self) -> [u8; 65]
pub fn as_bytes(&self) -> [u8; 65]
Returns the byte-array representation of this signature.
The first 32 bytes are the r
value, the second 32 bytes the s
value
and the final byte is the v
value in ‘Electrum’ notation.
pub fn with_parity<T>(self, parity: T) -> Signature
pub fn with_parity<T>(self, parity: T) -> Signature
Sets the recovery ID by normalizing a v
value.
pub fn rlp_rs_len(&self) -> usize
Available on crate feature rlp
only.
pub fn rlp_rs_len(&self) -> usize
rlp
only.Length of RLP RS field encoding
pub fn rlp_vrs_len(&self) -> usize
Available on crate feature rlp
only.
pub fn rlp_vrs_len(&self) -> usize
rlp
only.Length of RLP V field encoding
pub fn write_rlp_rs(&self, out: &mut dyn BufMut)
Available on crate feature rlp
only.
pub fn write_rlp_rs(&self, out: &mut dyn BufMut)
rlp
only.Write R and S to an RLP buffer in progress.
pub fn write_rlp_v(&self, out: &mut dyn BufMut)
Available on crate feature rlp
only.
pub fn write_rlp_v(&self, out: &mut dyn BufMut)
rlp
only.Write the V to an RLP buffer without using EIP-155.
pub fn write_rlp_vrs(&self, out: &mut dyn BufMut)
Available on crate feature rlp
only.
pub fn write_rlp_vrs(&self, out: &mut dyn BufMut)
rlp
only.Write the VRS to the output. The V will always be 27 or 28.
Trait Implementations§
§impl<'a> Arbitrary<'a> for Signature
Available on crate feature arbitrary
only.
impl<'a> Arbitrary<'a> for Signature
arbitrary
only.§fn arbitrary(u: &mut Unstructured<'a>) -> Result<Signature, Error>
fn arbitrary(u: &mut Unstructured<'a>) -> Result<Signature, Error>
Self
from the given unstructured data. Read more§fn arbitrary_take_rest(u: Unstructured<'a>) -> Result<Self, Error>
fn arbitrary_take_rest(u: Unstructured<'a>) -> Result<Self, Error>
Self
from the entirety of the given
unstructured data. Read more§fn size_hint(depth: usize) -> (usize, Option<usize>)
fn size_hint(depth: usize) -> (usize, Option<usize>)
Unstructured
this type
needs to construct itself. Read more§fn try_size_hint(
depth: usize,
) -> Result<(usize, Option<usize>), MaxRecursionReached>
fn try_size_hint( depth: usize, ) -> Result<(usize, Option<usize>), MaxRecursionReached>
Unstructured
this type
needs to construct itself. Read more§impl Arbitrary for Signature
Available on crate feature arbitrary
only.
impl Arbitrary for Signature
arbitrary
only.§type Parameters = ()
type Parameters = ()
arbitrary_with
accepts for configuration
of the generated Strategy
. Parameters must implement Default
.§type Strategy = FilterMap<<(Uint<256, 4>, Uint<256, 4>, Parity) as Arbitrary>::Strategy, fn(_: (Uint<256, 4>, Uint<256, 4>, Parity)) -> Option<Signature>>
type Strategy = FilterMap<<(Uint<256, 4>, Uint<256, 4>, Parity) as Arbitrary>::Strategy, fn(_: (Uint<256, 4>, Uint<256, 4>, Parity)) -> Option<Signature>>
Strategy
used to generate values of type Self
.§fn arbitrary_with(
_: <Signature as Arbitrary>::Parameters,
) -> <Signature as Arbitrary>::Strategy
fn arbitrary_with( _: <Signature as Arbitrary>::Parameters, ) -> <Signature as Arbitrary>::Strategy
§impl<'de> Deserialize<'de> for Signature
Available on crate feature serde
only.
impl<'de> Deserialize<'de> for Signature
serde
only.§fn deserialize<D>(
deserializer: D,
) -> Result<Signature, <D as Deserializer<'de>>::Error>where
D: Deserializer<'de>,
fn deserialize<D>(
deserializer: D,
) -> Result<Signature, <D as Deserializer<'de>>::Error>where
D: Deserializer<'de>,
§impl Serialize for Signature
Available on crate feature serde
only.
impl Serialize for Signature
serde
only.§fn serialize<S>(
&self,
serializer: S,
) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>where
S: Serializer,
fn serialize<S>(
&self,
serializer: S,
) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>where
S: Serializer,
§impl<'a> TryFrom<&'a [u8]> for Signature
impl<'a> TryFrom<&'a [u8]> for Signature
§fn try_from(
bytes: &'a [u8],
) -> Result<Signature, <Signature as TryFrom<&'a [u8]>>::Error>
fn try_from( bytes: &'a [u8], ) -> Result<Signature, <Signature as TryFrom<&'a [u8]>>::Error>
Parses a raw signature which is expected to be 65 bytes long where
the first 32 bytes is the r
value, the second 32 bytes the s
value
and the final byte is the v
value in ‘Electrum’ notation.
§type Error = SignatureError
type Error = SignatureError
impl Copy for Signature
impl Eq for Signature
impl StructuralPartialEq for Signature
Auto Trait Implementations§
impl Freeze for Signature
impl RefUnwindSafe for Signature
impl Send for Signature
impl Sync for Signature
impl Unpin for Signature
impl UnwindSafe for Signature
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<T> Conv for T
impl<T> Conv for T
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
key
and return true
if they are equal.§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Source§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
Source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
key
and return true
if they are equal.§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§fn in_current_span(self) -> Instrumented<Self> ⓘ
fn in_current_span(self) -> Instrumented<Self> ⓘ
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read more§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute
] value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
[Quirk
] value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition
] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self
, then passes self.as_mut()
into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self
, then passes self.deref()
into the pipe function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> PolicyExt for Twhere
T: ?Sized,
impl<T> PolicyExt for Twhere
T: ?Sized,
§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref()
only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<T> WithSubscriber for T
impl<T> WithSubscriber for T
§fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘwhere
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘwhere
S: Into<Dispatch>,
§fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ
fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ
Source§impl<T> WithSubscriber for T
impl<T> WithSubscriber for T
Source§fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘwhere
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘwhere
S: Into<Dispatch>,
Source§fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ
fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ
impl<A> ArbInterop for A
impl<T> DeserializeOwned for Twhere
T: for<'de> Deserialize<'de>,
impl<T> ErasedDestructor for Twhere
T: 'static,
impl<T> MaybeArbitrary for Twhere
T: for<'a> Arbitrary<'a>,
impl<T> MaybeDebug for Twhere
T: Debug,
impl<T> MaybeSend for Twhere
T: Send,
impl<T> MaybeSendSync for T
impl<T> MaybeSerde for Twhere
T: Serialize + for<'de> Deserialize<'de>,
impl<T> NippyJarHeader for T
impl<T> RpcObject for Twhere
T: RpcParam + RpcReturn,
impl<T> RpcParam for T
impl<T> RpcReturn for T
Layout§
Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...)
attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.
Size: 80 bytes