reth::network

Enum EthRlpxConnection

pub enum EthRlpxConnection<N = EthNetworkPrimitives>{
    EthOnly(Box<EthStream<P2PStream<ECIESStream<TcpStream>>, N>>),
    Satellite(Box<RlpxSatelliteStream<ECIESStream<TcpStream>, EthStream<ProtocolProxy, N>>>),
}
Expand description

Connection types that support the ETH protocol.

This can be either:

  • A connection that only supports the ETH protocol
  • A connection that supports the ETH protocol and at least one other RLPx protocol

Variants§

§

EthOnly(Box<EthStream<P2PStream<ECIESStream<TcpStream>>, N>>)

A connection that only supports the ETH protocol.

§

Satellite(Box<RlpxSatelliteStream<ECIESStream<TcpStream>, EthStream<ProtocolProxy, N>>>)

A connection that supports the ETH protocol and at least one other RLPx protocol.

Implementations§

§

impl<N> EthRlpxConnection<N>

pub fn start_send_broadcast( &mut self, item: EthBroadcastMessage<N>, ) -> Result<(), EthStreamError>

Same as [Sink::start_send] but accepts a [EthBroadcastMessage] instead.

Trait Implementations§

§

impl<N> Debug for EthRlpxConnection<N>

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl<N> From<EthStream<P2PStream<ECIESStream<TcpStream>>, N>> for EthRlpxConnection<N>

§

fn from( conn: EthStream<P2PStream<ECIESStream<TcpStream>>, N>, ) -> EthRlpxConnection<N>

Converts to this type from the input type.
§

impl<N> From<RlpxSatelliteStream<ECIESStream<TcpStream>, EthStream<ProtocolProxy, N>>> for EthRlpxConnection<N>

§

fn from( conn: RlpxSatelliteStream<ECIESStream<TcpStream>, EthStream<ProtocolProxy, N>>, ) -> EthRlpxConnection<N>

Converts to this type from the input type.
§

impl<N> Sink<EthMessage<N>> for EthRlpxConnection<N>

§

type Error = EthStreamError

The type of value produced by the sink when an error occurs.
§

fn poll_ready( self: Pin<&mut EthRlpxConnection<N>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <EthRlpxConnection<N> as Sink<EthMessage<N>>>::Error>>

Attempts to prepare the Sink to receive a value. Read more
§

fn start_send( self: Pin<&mut EthRlpxConnection<N>>, item: EthMessage<N>, ) -> Result<(), <EthRlpxConnection<N> as Sink<EthMessage<N>>>::Error>

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more
§

fn poll_flush( self: Pin<&mut EthRlpxConnection<N>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <EthRlpxConnection<N> as Sink<EthMessage<N>>>::Error>>

Flush any remaining output from this sink. Read more
§

fn poll_close( self: Pin<&mut EthRlpxConnection<N>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <EthRlpxConnection<N> as Sink<EthMessage<N>>>::Error>>

Flush any remaining output and close this sink, if necessary. Read more
§

impl<N> Stream for EthRlpxConnection<N>

§

type Item = Result<EthMessage<N>, EthStreamError>

Values yielded by the stream.
§

fn poll_next( self: Pin<&mut EthRlpxConnection<N>>, cx: &mut Context<'_>, ) -> Poll<Option<<EthRlpxConnection<N> as Stream>::Item>>

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted. Read more
§

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the stream. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Paint for T
where T: ?Sized,

§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Primary].

§Example
println!("{}", value.primary());
§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Fixed].

§Example
println!("{}", value.fixed(color));
§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color::Rgb].

§Example
println!("{}", value.rgb(r, g, b));
§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Black].

§Example
println!("{}", value.black());
§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Red].

§Example
println!("{}", value.red());
§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Green].

§Example
println!("{}", value.green());
§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Yellow].

§Example
println!("{}", value.yellow());
§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Blue].

§Example
println!("{}", value.blue());
§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Magenta].

§Example
println!("{}", value.magenta());
§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::Cyan].

§Example
println!("{}", value.cyan());
§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::White].

§Example
println!("{}", value.white());
§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlack].

§Example
println!("{}", value.bright_black());
§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightRed].

§Example
println!("{}", value.bright_red());
§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightGreen].

§Example
println!("{}", value.bright_green());
§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightYellow].

§Example
println!("{}", value.bright_yellow());
§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightBlue].

§Example
println!("{}", value.bright_blue());
§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightMagenta].

§Example
println!("{}", value.bright_magenta());
§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightCyan].

§Example
println!("{}", value.bright_cyan());
§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color::BrightWhite].

§Example
println!("{}", value.bright_white());
§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Primary].

§Example
println!("{}", value.on_primary());
§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Fixed].

§Example
println!("{}", value.on_fixed(color));
§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color::Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Black].

§Example
println!("{}", value.on_black());
§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Red].

§Example
println!("{}", value.on_red());
§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Green].

§Example
println!("{}", value.on_green());
§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Yellow].

§Example
println!("{}", value.on_yellow());
§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Blue].

§Example
println!("{}", value.on_blue());
§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Magenta].

§Example
println!("{}", value.on_magenta());
§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::Cyan].

§Example
println!("{}", value.on_cyan());
§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::White].

§Example
println!("{}", value.on_white());
§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlack].

§Example
println!("{}", value.on_bright_black());
§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightRed].

§Example
println!("{}", value.on_bright_red());
§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightGreen].

§Example
println!("{}", value.on_bright_green());
§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightBlue].

§Example
println!("{}", value.on_bright_blue());
§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color::BrightWhite].

§Example
println!("{}", value.on_bright_white());
§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Bold].

§Example
println!("{}", value.bold());
§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Dim].

§Example
println!("{}", value.dim());
§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Italic].

§Example
println!("{}", value.italic());
§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute::Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute::RapidBlink].

§Example
println!("{}", value.rapid_blink());
§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Invert].

§Example
println!("{}", value.invert());
§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Conceal].

§Example
println!("{}", value.conceal());
§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute::Strike].

§Example
println!("{}", value.strike());
§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Mask].

§Example
println!("{}", value.mask());
§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Wrap].

§Example
println!("{}", value.wrap());
§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Linger].

§Example
println!("{}", value.linger());
§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk::Clear].

§Example
println!("{}", value.clear());
§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Resetting].

§Example
println!("{}", value.resetting());
§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::Bright].

§Example
println!("{}", value.bright());
§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk::OnBright].

§Example
println!("{}", value.on_bright());
§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more
§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T, Item> SinkExt<Item> for T
where T: Sink<Item> + ?Sized,

§

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F>
where F: FnMut(U) -> Fut, Fut: Future<Output = Result<Item, E>>, E: From<Self::Error>, Self: Sized,

Composes a function in front of the sink. Read more
§

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F>
where F: FnMut(U) -> St, St: Stream<Item = Result<Item, Self::Error>>, Self: Sized,

Composes a function in front of the sink. Read more
§

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F>
where F: FnOnce(Self::Error) -> E, Self: Sized,

Transforms the error returned by the sink.
§

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E>
where Self: Sized, Self::Error: Into<E>,

Map this sink’s error to a different error type using the Into trait. Read more
§

fn buffer(self, capacity: usize) -> Buffer<Self, Item>
where Self: Sized,

Available on crate feature alloc only.
Adds a fixed-size buffer to the current sink. Read more
§

fn close(&mut self) -> Close<'_, Self, Item>
where Self: Unpin,

Close the sink.
§

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si>
where Self: Sized, Item: Clone, Si: Sink<Item, Error = Self::Error>,

Fanout items to multiple sinks. Read more
§

fn flush(&mut self) -> Flush<'_, Self, Item>
where Self: Unpin,

Flush the sink, processing all pending items. Read more
§

fn send(&mut self, item: Item) -> Send<'_, Self, Item>
where Self: Unpin,

A future that completes after the given item has been fully processed into the sink, including flushing. Read more
§

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item>
where Self: Unpin,

A future that completes after the given item has been received by the sink. Read more
§

fn send_all<'a, St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St>
where St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized, Self: Unpin,

A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
§

fn left_sink<Si2>(self) -> Either<Self, Si2>
where Si2: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this sink in an Either sink, making it the left-hand variant of that Either. Read more
§

fn right_sink<Si1>(self) -> Either<Si1, Self>
where Si1: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
§

fn poll_ready_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling [Sink::poll_ready] on Unpin sink types.
§

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error>
where Self: Unpin,

A convenience method for calling [Sink::start_send] on Unpin sink types.
§

fn poll_flush_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling [Sink::poll_flush] on Unpin sink types.
§

fn poll_close_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling [Sink::poll_close] on Unpin sink types.
§

impl<St> StreamExt for St
where St: Stream + ?Sized,

§

fn next(&mut self) -> Next<'_, Self>
where Self: Unpin,

Consumes and returns the next value in the stream or None if the stream is finished. Read more
§

fn try_next<T, E>(&mut self) -> TryNext<'_, Self>
where Self: Stream<Item = Result<T, E>> + Unpin,

Consumes and returns the next item in the stream. If an error is encountered before the next item, the error is returned instead. Read more
§

fn map<T, F>(self, f: F) -> Map<Self, F>
where F: FnMut(Self::Item) -> T, Self: Sized,

Maps this stream’s items to a different type, returning a new stream of the resulting type. Read more
§

fn map_while<T, F>(self, f: F) -> MapWhile<Self, F>
where F: FnMut(Self::Item) -> Option<T>, Self: Sized,

Map this stream’s items to a different type for as long as determined by the provided closure. A stream of the target type will be returned, which will yield elements until the closure returns None. Read more
§

fn then<F, Fut>(self, f: F) -> Then<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future, Self: Sized,

Maps this stream’s items asynchronously to a different type, returning a new stream of the resulting type. Read more
§

fn merge<U>(self, other: U) -> Merge<Self, U>
where U: Stream<Item = Self::Item>, Self: Sized,

Combine two streams into one by interleaving the output of both as it is produced. Read more
§

fn filter<F>(self, f: F) -> Filter<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Filters the values produced by this stream according to the provided predicate. Read more
§

fn filter_map<T, F>(self, f: F) -> FilterMap<Self, F>
where F: FnMut(Self::Item) -> Option<T>, Self: Sized,

Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided closure. Read more
§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Creates a stream which ends after the first None. Read more
§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates a new stream of at most n items of the underlying stream. Read more
§

fn take_while<F>(self, f: F) -> TakeWhile<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Take elements from this stream while the provided predicate resolves to true. Read more
§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates a new stream that will skip the n first items of the underlying stream. Read more
§

fn skip_while<F>(self, f: F) -> SkipWhile<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Skip elements from the underlying stream while the provided predicate resolves to true. Read more
§

fn all<F>(&mut self, f: F) -> AllFuture<'_, Self, F>
where Self: Unpin, F: FnMut(Self::Item) -> bool,

Tests if every element of the stream matches a predicate. Read more
§

fn any<F>(&mut self, f: F) -> AnyFuture<'_, Self, F>
where Self: Unpin, F: FnMut(Self::Item) -> bool,

Tests if any element of the stream matches a predicate. Read more
§

fn chain<U>(self, other: U) -> Chain<Self, U>
where U: Stream<Item = Self::Item>, Self: Sized,

Combine two streams into one by first returning all values from the first stream then all values from the second stream. Read more
§

fn fold<B, F>(self, init: B, f: F) -> FoldFuture<Self, B, F>
where Self: Sized, F: FnMut(B, Self::Item) -> B,

A combinator that applies a function to every element in a stream producing a single, final value. Read more
§

fn collect<T>(self) -> Collect<Self, T>
where T: FromStream<Self::Item>, Self: Sized,

Drain stream pushing all emitted values into a collection. Read more
§

fn timeout(self, duration: Duration) -> Timeout<Self>
where Self: Sized,

Available on crate feature time only.
Applies a per-item timeout to the passed stream. Read more
§

fn timeout_repeating(self, interval: Interval) -> TimeoutRepeating<Self>
where Self: Sized,

Available on crate feature time only.
Applies a per-item timeout to the passed stream. Read more
§

fn throttle(self, duration: Duration) -> Throttle<Self>
where Self: Sized,

Available on crate feature time only.
Slows down a stream by enforcing a delay between items. Read more
§

fn chunks_timeout( self, max_size: usize, duration: Duration, ) -> ChunksTimeout<Self>
where Self: Sized,

Available on crate feature time only.
Batches the items in the given stream using a maximum duration and size for each batch. Read more
§

fn peekable(self) -> Peekable<Self>
where Self: Sized,

Turns the stream into a peekable stream, whose next element can be peeked at without being consumed. Read more
§

impl<T> StreamExt for T
where T: Stream + ?Sized,

§

fn next(&mut self) -> Next<'_, Self>
where Self: Unpin,

Creates a future that resolves to the next item in the stream. Read more
§

fn into_future(self) -> StreamFuture<Self>
where Self: Sized + Unpin,

Converts this stream into a future of (next_item, tail_of_stream). If the stream terminates, then the next item is None. Read more
§

fn map<T, F>(self, f: F) -> Map<Self, F>
where F: FnMut(Self::Item) -> T, Self: Sized,

Maps this stream’s items to a different type, returning a new stream of the resulting type. Read more
§

fn enumerate(self) -> Enumerate<Self>
where Self: Sized,

Creates a stream which gives the current iteration count as well as the next value. Read more
§

fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Filters the values produced by this stream according to the provided asynchronous predicate. Read more
§

fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = Option<T>>, Self: Sized,

Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more
§

fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future, Self: Sized,

Computes from this stream’s items new items of a different type using an asynchronous closure. Read more
§

fn collect<C>(self) -> Collect<Self, C>
where C: Default + Extend<Self::Item>, Self: Sized,

Transforms a stream into a collection, returning a future representing the result of that computation. Read more
§

fn unzip<A, B, FromA, FromB>(self) -> Unzip<Self, FromA, FromB>
where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Stream<Item = (A, B)>,

Converts a stream of pairs into a future, which resolves to pair of containers. Read more
§

fn concat(self) -> Concat<Self>
where Self: Sized, Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator + Default,

Concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more
§

fn count(self) -> Count<Self>
where Self: Sized,

Drives the stream to completion, counting the number of items. Read more
§

fn cycle(self) -> Cycle<Self>
where Self: Sized + Clone,

Repeats a stream endlessly. Read more
§

fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F>
where F: FnMut(T, Self::Item) -> Fut, Fut: Future<Output = T>, Self: Sized,

Execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more
§

fn any<Fut, F>(self, f: F) -> Any<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Execute predicate over asynchronous stream, and return true if any element in stream satisfied a predicate. Read more
§

fn all<Fut, F>(self, f: F) -> All<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Execute predicate over asynchronous stream, and return true if all element in stream satisfied a predicate. Read more
§

fn flatten(self) -> Flatten<Self>
where Self::Item: Stream, Self: Sized,

Flattens a stream of streams into just one continuous stream. Read more
§

fn flatten_unordered( self, limit: impl Into<Option<usize>>, ) -> FlattenUnorderedWithFlowController<Self, ()>
where Self::Item: Stream + Unpin, Self: Sized,

Available on crate feature alloc only.
Flattens a stream of streams into just one continuous stream. Polls inner streams produced by the base stream concurrently. Read more
§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>
where F: FnMut(Self::Item) -> U, U: Stream, Self: Sized,

Maps a stream like [StreamExt::map] but flattens nested Streams. Read more
§

fn flat_map_unordered<U, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> FlatMapUnordered<Self, U, F>
where U: Stream + Unpin, F: FnMut(Self::Item) -> U, Self: Sized,

Available on crate feature alloc only.
Maps a stream like [StreamExt::map] but flattens nested Streams and polls them concurrently, yielding items in any order, as they made available. Read more
§

fn scan<S, B, Fut, F>(self, initial_state: S, f: F) -> Scan<Self, S, Fut, F>
where F: FnMut(&mut S, Self::Item) -> Fut, Fut: Future<Output = Option<B>>, Self: Sized,

Combinator similar to [StreamExt::fold] that holds internal state and produces a new stream. Read more
§

fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Skip elements on this stream while the provided asynchronous predicate resolves to true. Read more
§

fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Take elements from this stream while the provided asynchronous predicate resolves to true. Read more
§

fn take_until<Fut>(self, fut: Fut) -> TakeUntil<Self, Fut>
where Fut: Future, Self: Sized,

Take elements from this stream until the provided future resolves. Read more
§

fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more
§

fn for_each_concurrent<Fut, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> ForEachConcurrent<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Available on crate feature alloc only.
Runs this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available. Read more
§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates a new stream of at most n items of the underlying stream. Read more
§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates a new stream which skips n items of the underlying stream. Read more
§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Fuse a stream such that poll_next will never again be called once it has finished. This method can be used to turn any Stream into a FusedStream. Read more
§

fn by_ref(&mut self) -> &mut Self

Borrows a stream, rather than consuming it. Read more
§

fn catch_unwind(self) -> CatchUnwind<Self>
where Self: Sized + UnwindSafe,

Available on crate feature std only.
Catches unwinding panics while polling the stream. Read more
§

fn boxed<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a>>
where Self: Sized + Send + 'a,

Available on crate feature alloc only.
Wrap the stream in a Box, pinning it. Read more
§

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a>>
where Self: Sized + 'a,

Available on crate feature alloc only.
Wrap the stream in a Box, pinning it. Read more
§

fn buffered(self, n: usize) -> Buffered<Self>
where Self::Item: Future, Self: Sized,

Available on crate feature alloc only.
An adaptor for creating a buffered list of pending futures. Read more
§

fn buffer_unordered(self, n: usize) -> BufferUnordered<Self>
where Self::Item: Future, Self: Sized,

Available on crate feature alloc only.
An adaptor for creating a buffered list of pending futures (unordered). Read more
§

fn zip<St>(self, other: St) -> Zip<Self, St>
where St: Stream, Self: Sized,

An adapter for zipping two streams together. Read more
§

fn chain<St>(self, other: St) -> Chain<Self, St>
where St: Stream<Item = Self::Item>, Self: Sized,

Adapter for chaining two streams. Read more
§

fn peekable(self) -> Peekable<Self>
where Self: Sized,

Creates a new stream which exposes a peek method. Read more
§

fn chunks(self, capacity: usize) -> Chunks<Self>
where Self: Sized,

Available on crate feature alloc only.
An adaptor for chunking up items of the stream inside a vector. Read more
§

fn ready_chunks(self, capacity: usize) -> ReadyChunks<Self>
where Self: Sized,

Available on crate feature alloc only.
An adaptor for chunking up ready items of the stream inside a vector. Read more
§

fn forward<S>(self, sink: S) -> Forward<Self, S>
where S: Sink<Self::Ok, Error = Self::Error>, Self: Sized + TryStream,

Available on crate feature sink only.
A future that completes after the given stream has been fully processed into the sink and the sink has been flushed and closed. Read more
§

fn split<Item>(self) -> (SplitSink<Self, Item>, SplitStream<Self>)
where Self: Sized + Sink<Item>,

Available on crate features sink and alloc only.
Splits this Stream + Sink object into separate Sink and Stream objects. Read more
§

fn inspect<F>(self, f: F) -> Inspect<Self, F>
where F: FnMut(&Self::Item), Self: Sized,

Do something with each item of this stream, afterwards passing it on. Read more
§

fn left_stream<B>(self) -> Either<Self, B>
where B: Stream<Item = Self::Item>, Self: Sized,

Wrap this stream in an Either stream, making it the left-hand variant of that Either. Read more
§

fn right_stream<B>(self) -> Either<B, Self>
where B: Stream<Item = Self::Item>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
§

fn poll_next_unpin(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>>
where Self: Unpin,

A convenience method for calling [Stream::poll_next] on Unpin stream types.
§

fn select_next_some(&mut self) -> SelectNextSome<'_, Self>
where Self: Unpin + FusedStream,

Returns a Future that resolves when the next item in this stream is ready. Read more
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<S, T, E> TryStream for S
where S: Stream<Item = Result<T, E>> + ?Sized,

§

type Ok = T

The type of successful values yielded by this future
§

type Error = E

The type of failures yielded by this future
§

fn try_poll_next( self: Pin<&mut S>, cx: &mut Context<'_>, ) -> Poll<Option<Result<<S as TryStream>::Ok, <S as TryStream>::Error>>>

Poll this TryStream as if it were a Stream. Read more
§

impl<S> TryStreamExt for S
where S: TryStream + ?Sized,

§

fn err_into<E>(self) -> ErrInto<Self, E>
where Self: Sized, Self::Error: Into<E>,

Wraps the current stream in a new stream which converts the error type into the one provided. Read more
§

fn map_ok<T, F>(self, f: F) -> MapOk<Self, F>
where Self: Sized, F: FnMut(Self::Ok) -> T,

Wraps the current stream in a new stream which maps the success value using the provided closure. Read more
§

fn map_err<E, F>(self, f: F) -> MapErr<Self, F>
where Self: Sized, F: FnMut(Self::Error) -> E,

Wraps the current stream in a new stream which maps the error value using the provided closure. Read more
§

fn and_then<Fut, F>(self, f: F) -> AndThen<Self, Fut, F>
where F: FnMut(Self::Ok) -> Fut, Fut: TryFuture<Error = Self::Error>, Self: Sized,

Chain on a computation for when a value is ready, passing the successful results to the provided closure f. Read more
§

fn or_else<Fut, F>(self, f: F) -> OrElse<Self, Fut, F>
where F: FnMut(Self::Error) -> Fut, Fut: TryFuture<Ok = Self::Ok>, Self: Sized,

Chain on a computation for when an error happens, passing the erroneous result to the provided closure f. Read more
§

fn inspect_ok<F>(self, f: F) -> InspectOk<Self, F>
where F: FnMut(&Self::Ok), Self: Sized,

Do something with the success value of this stream, afterwards passing it on. Read more
§

fn inspect_err<F>(self, f: F) -> InspectErr<Self, F>
where F: FnMut(&Self::Error), Self: Sized,

Do something with the error value of this stream, afterwards passing it on. Read more
§

fn into_stream(self) -> IntoStream<Self>
where Self: Sized,

Wraps a [TryStream] into a type that implements Stream Read more
§

fn try_next(&mut self) -> TryNext<'_, Self>
where Self: Unpin,

Creates a future that attempts to resolve the next item in the stream. If an error is encountered before the next item, the error is returned instead. Read more
§

fn try_for_each<Fut, F>(self, f: F) -> TryForEach<Self, Fut, F>
where F: FnMut(Self::Ok) -> Fut, Fut: TryFuture<Ok = (), Error = Self::Error>, Self: Sized,

Attempts to run this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more
§

fn try_skip_while<Fut, F>(self, f: F) -> TrySkipWhile<Self, Fut, F>
where F: FnMut(&Self::Ok) -> Fut, Fut: TryFuture<Ok = bool, Error = Self::Error>, Self: Sized,

Skip elements on this stream while the provided asynchronous predicate resolves to true. Read more
§

fn try_take_while<Fut, F>(self, f: F) -> TryTakeWhile<Self, Fut, F>
where F: FnMut(&Self::Ok) -> Fut, Fut: TryFuture<Ok = bool, Error = Self::Error>, Self: Sized,

Take elements on this stream while the provided asynchronous predicate resolves to true. Read more
§

fn try_for_each_concurrent<Fut, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> TryForEachConcurrent<Self, Fut, F>
where F: FnMut(Self::Ok) -> Fut, Fut: Future<Output = Result<(), Self::Error>>, Self: Sized,

Available on crate feature alloc only.
Attempts to run this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available, exiting as soon as an error occurs. Read more
§

fn try_collect<C>(self) -> TryCollect<Self, C>
where C: Default + Extend<Self::Ok>, Self: Sized,

Attempt to transform a stream into a collection, returning a future representing the result of that computation. Read more
§

fn try_chunks(self, capacity: usize) -> TryChunks<Self>
where Self: Sized,

Available on crate feature alloc only.
An adaptor for chunking up successful items of the stream inside a vector. Read more
§

fn try_ready_chunks(self, capacity: usize) -> TryReadyChunks<Self>
where Self: Sized,

Available on crate feature alloc only.
An adaptor for chunking up successful, ready items of the stream inside a vector. Read more
§

fn try_filter<Fut, F>(self, f: F) -> TryFilter<Self, Fut, F>
where Fut: Future<Output = bool>, F: FnMut(&Self::Ok) -> Fut, Self: Sized,

Attempt to filter the values produced by this stream according to the provided asynchronous closure. Read more
§

fn try_filter_map<Fut, F, T>(self, f: F) -> TryFilterMap<Self, Fut, F>
where Fut: TryFuture<Ok = Option<T>, Error = Self::Error>, F: FnMut(Self::Ok) -> Fut, Self: Sized,

Attempt to filter the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more
§

fn try_flatten_unordered( self, limit: impl Into<Option<usize>>, ) -> TryFlattenUnordered<Self>
where Self::Ok: TryStream + Unpin, <Self::Ok as TryStream>::Error: From<Self::Error>, Self: Sized,

Available on crate feature alloc only.
Flattens a stream of streams into just one continuous stream. Produced streams will be polled concurrently and any errors will be passed through without looking at them. If the underlying base stream returns an error, it will be immediately propagated. Read more
§

fn try_flatten(self) -> TryFlatten<Self>
where Self::Ok: TryStream, <Self::Ok as TryStream>::Error: From<Self::Error>, Self: Sized,

Flattens a stream of streams into just one continuous stream. Read more
§

fn try_fold<T, Fut, F>(self, init: T, f: F) -> TryFold<Self, Fut, T, F>
where F: FnMut(T, Self::Ok) -> Fut, Fut: TryFuture<Ok = T, Error = Self::Error>, Self: Sized,

Attempt to execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more
§

fn try_concat(self) -> TryConcat<Self>
where Self: Sized, Self::Ok: Extend<<Self::Ok as IntoIterator>::Item> + IntoIterator + Default,

Attempt to concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more
§

fn try_buffer_unordered(self, n: usize) -> TryBufferUnordered<Self>
where Self::Ok: TryFuture<Error = Self::Error>, Self: Sized,

Available on crate feature alloc only.
Attempt to execute several futures from a stream concurrently (unordered). Read more
§

fn try_buffered(self, n: usize) -> TryBuffered<Self>
where Self::Ok: TryFuture<Error = Self::Error>, Self: Sized,

Available on crate feature alloc only.
Attempt to execute several futures from a stream concurrently. Read more
§

fn try_poll_next_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Option<Result<Self::Ok, Self::Error>>>
where Self: Unpin,

A convenience method for calling [TryStream::try_poll_next] on Unpin stream types.
§

fn into_async_read(self) -> IntoAsyncRead<Self>
where Self: Sized + TryStreamExt<Error = Error>, Self::Ok: AsRef<[u8]>,

Available on crate features io and std only.
Adapter that converts this stream into an AsyncBufRead. Read more
§

fn try_all<Fut, F>(self, f: F) -> TryAll<Self, Fut, F>
where Self: Sized, F: FnMut(Self::Ok) -> Fut, Fut: Future<Output = bool>,

Attempt to execute a predicate over an asynchronous stream and evaluate if all items satisfy the predicate. Exits early if an Err is encountered or if an Ok item is found that does not satisfy the predicate. Read more
§

fn try_any<Fut, F>(self, f: F) -> TryAny<Self, Fut, F>
where Self: Sized, F: FnMut(Self::Ok) -> Fut, Fut: Future<Output = bool>,

Attempt to execute a predicate over an asynchronous stream and evaluate if any items satisfy the predicate. Exits early if an Err is encountered or if an Ok item is found that satisfies the predicate. Read more
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> MaybeDebug for T
where T: Debug,

§

impl<T> MaybeSend for T
where T: Send,

§

impl<T> MaybeSendSync for T

Layout§

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 16 bytes

Size for each variant:

  • EthOnly: 8 bytes
  • Satellite: 8 bytes